MONDRAKER CRAFTY CARBON RR SL BIKE

The MONDRAKER CRAFTY CARBON RR SL BIKE is an enduro e-mtb with "29" wheels. The frame is made of Stealth carbon and has the Acros ICR (Integrated Cable Routing) system with internal cable routing for brakes, rear derailleur and telescopic seatpost. The carbon link is reinforced with Enduro Max oversized sealed bearings. The frame is designed for 1x12 transmissions and is equipped with a ventilation system, with openings on the top and one on the bottom of the down tube, which allows the battery to cool. The engine is ventilated by side fins.
The bike has the suspension system "Zero" specifically designed for e-mtb, the excursion of 150 mm has an excellent initial sensitivity and then become more and more progressive at the bottom of the stroke, at the front the excursion is 160 mm.
The Crafty Carbon is compatible with the Boost 148 hubs system and is equipped with a new, less noisy, chain-beater able to better dampen vibrations coming from the ground.
This e-bike is equipped with the Bosch Performance Line CX 4 engine with integrated Bosch PoweTube 625Wh non-removable battery as the bike is designed for strong pedaling and not for long distances.
The speed sensor is well protected and integrated on the rear wagon while the motor is protected by a plastic cover specifically made for Crafty Carbon.
As far as geometry is concerned, the Forward Geometry system has been optimized and the bike now has a longer reach, a 30 mm stem, a 65.5° steering angle, 76° seat tube angle, 455 mm rear carriage and 44 mm fork offset.

MONDRAKER CRAFTY CARBON RR SL BIKE MAIN FEATURES:

• E-MTB enduro.
• 29" wheels.
• Zero" suspension system.
• Bosch Performance Line CX 4 engine.
• Integrated Bosch PoweTube 625Wh battery.
• Forward Geometry system.

TECHNICAL SPECIFICATIONS

• FRAME: Crafty Stealth Air full Carbon, zero suspension system optimized for e-bikes, 150mm stroke, front geometry, non-removable internal battery, 12x148mm Boost rear axle, tapered head tube, Monoblock upper link, HHG internal cable routing, sealed bearing MAX capacity, oversized 17mm axles, integrated speed sensor, motor covered by plastic cover specially made for Crafty Carbon.
• DAMPER: Fox Float DPS Factory Kashima, 205x65mm. Settings: 3-position compression lever, low speed compression, low speed rebound, air preload. Trunnion upper bracket, 25x10mm lower bushings.
• SIZES: S: 380 mm / M: 420 mm / W: 450 mm / XL: 490 mm.
• FORK: Fox 36 29 Float FIT4 EVOL Factory Kashima, 160mm, conical head tube for e-bike, Boost pin 15x110mm, offset 44mm. Settings: 3 positions with micro adjustment compression, low speed rebound, air preload.
• HEADSET: Custom made for 1-1 / 2 " head tube, angular contact bearings 40x52x7, internal cable routing.
• STEM: Onoff Krypton FG 30mm, forged alloy 6061, barbs 31,8mm.
• HANDLEBAR: Onoff Krypton Carbon 0.5, rise: 12,5mm, width: 780mm, reverse 9º, sweep 5º, barbs 31,8mm.
• GRIPS: Lizard Skins DSP, sizes: S/M L/XL.
• SEATPOST: AXS RockShox Reverb Stealth, diameter 31.6mm, size S: 390x125mm, size M/W: 440x150mm, size XL: 440x170mm.
• SADDLE: Fizik Antares R1 Large.
• FRONT BRAKE: Shimano XTR M9120, 4-piston caliper, CenterLock MT900 ICE-Tech 203mm rotor, resin bearings with fin.
• REAR BRAKE: Shimano XTR M9120, 4-piston caliper, CenterLock MT900 ICE-Tech 203mm rotor, resin bearings with fin.
• BRAKE LEVER: Shimano XTR, ergonomic anti-skid lever with servo wave, tool less reach adjust, free stroke adjust.
• RIMS: DT Swiss HXC 1200 Carbon Spline 29, internal width 30mm, tubeless ready, 28 spokes.
• SPOKES: DT Hybrid SP, straight pull.
• FRONT HUB: DT 240, 15x110mm, CenterLock.
• REAR HUB: DT 240, 15x110mm, CenterLock.
• FRONT TIRE: Maxxis Rekon 29x2.6, Tubeless Ready, 3C MAXX TERRA, EXO + Protection, 60TPI, faltbar.
• REAR TIRE: Maxxis Rekon 29x2.6, Tubeless Ready, 3C MAXX TERRA, EXO + Protection, 60TPI, faltbar.
• CRANKSET: Bosch Performance Line CX Gen4 system, PowerTube 625 Wh battery, Kiox on-board computer, RaceFace Aeffect ebike crankset, 165mm.
• CHAINRING: SRAM X-Sync 2 Eagle 34T, wide-wide, Bosch Gen4 DM.
• CHAIN: Sram GX Eagle, 12 speeds.
• REAR DERAILLEUR: Sram X01 Eagle AXS, roller bearing clutch type 3, cage lock, 1x12 speeds.
• REAR DERAILLEUR CONTROL: Sram Trigger Eagle AXS, 12 speeds.
• PIGNON: Sram XG-1299, 10-50T, 12 speeds.
• HANGER: Mondraker M068.
• WEIGHT (WITHOUT PEDALS): 19.3 kg.
• PEDALS: not included.