BICI SPECIALIZED STUMJUMPER EVO PRO

SPECIALIZED STUMPJUMPER EVO PRO BIKE

Cod. 23131441

from 4,800.00 €

Free shipping for orders over 49 € (UE Countries). Free shipping to Extra-Ue countries from 89 €

complete your choice

SPECIALIZED STUMPJUMPER EVO PRO BIKE

The Stumpjumper EVO Pro is an uncompromising trail bike. S-Sizing geometry, adjustable head angle, and 150mm of travel. Lightweight and capable, featuring FOX Factory suspension, carbon wheels, and X01 Eagle drivetrain.

Mullet setup with a 29" front wheel and 27.5" rear wheel. Traction and handling like a 29er, with the agility of a smaller rear wheel.
Suspension travel is useless without the right kinematics, and we kept that in mind when designing the Stumpjumper EVO. Using what we learned from developing the Enduro and over 1,000 hours of field and lab testing, we've significantly improved pedaling efficiency while delivering capability, efficiency, and liveliness. We've increased anti-squat for better resistance to pedal bob and improved shock absorption on sharp impacts. In short, the Stumpjumper descends with full control and climbs with agility.
The Stumpjumper EVO's S-Sizing geometry is the most progressive yet. Long, low, slack, with a short fork offset and steeper seat tube - all designed to improve pedaling performance. However, the perfect geometry varies from rider to rider, which is why the Stumpjumper EVO allows you to adjust it in six different positions. Not only can you raise the bottom bracket by 10mm, but you can also adjust the head angle by up to two degrees. And if you like the mullet setup, you can pair a 27.5" rear wheel with a 29" front.
Rider-First Engineered™ technology ensures size-specific design, guaranteeing the same ride quality across all sizes. Whether you're on an S1 or an S6, you'll experience the same cornering confidence, stiffness balance, and lightweight feel.
In 2016, we introduced the SWAT™ storage compartment in the Stumpjumper frame to store tools or other essentials for flat repairs. Now, for the Stumpjumper, we've expanded the space, adding the SWAT™ Bladder, allowing you to carry 650ml of water inside the down tube - the same amount as a water bottle.

Specifications

Drivetrain
Bottom Bracket
SRAM DUB, BSA 73mm, Threaded
Shifters
SRAM Eagle AXS Rocker Paddle
Rear Derailleur
SRAM X01 Eagle AXS
Crankset
SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
Cassette
SRAM XG-1295 Eagle, 10-52t
Chain
SRAM X01 Eagle, 12-speed
Chainring
32T
Frame
Seat Collar
Alloy, 38.6mm
Frame
FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5" Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
Suspension
Fork
FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
Rear Shock
FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm
Brakes
Front Brake
SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2
Rear Brake
SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2
Wheels
Front Tire
Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
Spokes
DT Competition Race
Rear Hub
DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Front Hub
DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h
Rear Tire
Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3"
Rims
Roval Traverse Carbon 29F/27.5R, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready
Tubes
Standard, Presta Valve
Cockpit
Saddle
Bridge, 155/143mm, Hollow Ti-rails
Stem
Deity, 35.0mm
Handlebars
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
Cockpit
Grips
Deity Lockjaw
Seatpost
Bike Yoke, Revive Max, 34.9 (S1:120mm, S2-S3:150mm, S4-S5: 185mm, S6: 213mm)
Weight
Weight
13.86kg (30 lb, 8.9 oz)
Weight Size
S4